Reasons Your Water Heater Isn't Functioning

Go Services

What're your thoughts with regards to How to Troubleshoot and Repair an Electric Water Heater?



Many modern residences take advantage of an electrical hot water heater for their furnace, as a result of its comfort as well as simplicity of use. Nevertheless, similar to any other electric home appliances, problems might develop with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case might be, hot water heater problems can be fairly stressful. Thankfully, we have actually made a listing of possible remedies to your water heater issues. There are a variety of elements that can trigger a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed must not position too much of a concern if you comply with these steps:

Call A Specialist:


If after replacing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might need to speak to a professional plumber for a professional point of view. The issue with your heating system could be that the cold and hot taps have actually been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, a professional plumber would certainly help fix the trouble.

Inspect Your Power Supply:


As standard as this may seem, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any broken or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red switch for temperature reset above the thermostat. This must aid warm the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been resolved.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power trouble, after that attempt having a look at your heating element if it is still working. Check each of your burner to ensure the trouble isn't with any one of them. If any of them is faulty, replace that part and after that inspect whether the warm water is back on.

Final thought


Hot water heater troubles are not constantly significant. Most of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the faulty parts should do the trick. However, if you are still unable to resolve the problem, give a call to your closest plumber to come to get it fixed.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    No Hot Water — Water Heater Repair

    I ran across that blog posting on How to Troubleshoot and Repair an Electric Water Heater when browsing the web. Sharing is caring. Helping others is fun. I truly appreciate reading our article about Hot Water Heater Repair.




    Book A Service

    Leave a Reply

    Your email address will not be published. Required fields are marked *